氟膠夾布密封圈-James walker Solosele S

Solosele S is our highly popular unit seal of simple construction, specially designed for use with double-acting split piston heads.

Special features

1 Robust double-acting seal.

2 Compact unit that needs minimum housing space.

3 Recommended for medium to heavy duty applications.

4 Fully-moulded, one piece construction, with integral anti-extrusion elements for long life.

5 Should be used in conjunction with Lionsele B1 or B2 bearing strips to eliminate metalto- metal contact and other problems associated with offset pistons.

Materials of construction

Elastomeric core

Standard material: medium nitrile (NBR).

Special materials: low nitrile (NBR), or fluorocarbon (FKM).

Anti-extrusion elements

Standard material: cotton fabric proofed with blend of synthetic rubbers.

Special materials: cotton fabric proofed with blend of synthetic rubbers for use with seal core of low nitrile (NBR). Fabric proofed with fluorocarbon (FKM) for use with seal core of fluorocarbon (FKM).

Typical applications

Split piston heads in double-acting

hydraulic applications of medium to heavy

duty — especially where space is at a

premium.

Operating capabilities

• Maximum operating pressure:

42MPa (6092psi).

• Temperature range (standard

materials): -20°C to +120°C

(-4°F to +248°F).

• Temperature limits (special materials):

down to -45°C (-49°F) with low nitrile

(NBR); or up to +200°C (+392°F) with

fluoroelastomer (FKM).

• Maximum surface speed: 0.5m/s

(98.4fpm). For higher speeds please

consult our Technical Support Team

Media capabilities

Standard materials are suitable for use

with most mineral based hydraulic fluids,

and most fire-resistant fluids of the water/

oil emulsion or water/glycol types at

temperatures up to 120°C (248°F). They

also resist air, water, and most lubricating

oils and greases.

Special materials extend considerably

the range of application in terms of

temperature and fluid compatibility.

Please consult our Technical Support

Team.